ALIVE HOME | Smart home installation method

1. The switch bottom box reserves a neutral line

There is only live wire in the normal switch panel, and there is no neutral wire. If you install a smart switch, try to ask the electrician to wear the neutral wire. The principle is very simple. Any smart device needs to be powered by a neutral wire to work. It can be installed without a neutral wire after decoration, but the stability of a neutral wire is higher.

2. Choose a non-metallic bottom box

The metal bottom box will shield the signal, the ordinary 86 bottom box is enough, try not to choose the bottom box with too shallow depth, the bottom box with a depth of 6 cm and above is definitely no problem, if it is lower than 5 cm, it may be difficult to install in the future strenuous.

3. It is recommended that each switch has a maximum of two loops

From the perspective of operation experience, the experience of two loops is much better than that of three loops or even four loops. The buttons of three loops are too small and it is very laborious to operate. If there are 3 circuits in a single room, two switches can be installed. If three loops have been made, it can also be installed, and two of them can be combined into one.

4. It is recommended to leave the light belt groove

After leaving the slot for the light strip, you can install the toning light, and the toning light can change color along with music or TV.

5. Install sensor lights in the bathroom

Sensor lights in bathrooms, aisles, and kitchens can now be installed. With sensor lights, there is no need to switch them manually, and they will automatically light up when people enter.

BACK TO HOME PAGE